HEIDENHAIN TNC 620 User Manual page 581

17.3 Machine settings
External access
The machine tool builder can configure the external
access options. Refer to your machine manual.
Machine-dependent function: With the TNCOPT soft
key, you can permit or lock access for an external
diagnostics or commissioning program.
With the MOD function External access you can grant or restrict
access to the TNC. If you have restricted the external access it
is no longer possible to connect to the TNC and exchange data
via a network or a serial connection, e.g. with the TNCremo data
transfer software.
Restricting external access:
In the MOD menu select the Machine settings group
Select the External access menu
Set the EXTERNAL ACCESS ON/OFF soft key to OFF
Press the OK soft key
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Machine settings
17
17.3
581