HEIDENHAIN TNC 620 User Manual page 83

Overview
The TNC shows the status form Overview after your turn on the
TNC provided you have selected the PROGRAM + STATUS (or
POSITION + STATUS) screen layout. The overview form contains a
summary of the most important status information, which you can
also find on the various detail forms.
Soft key Meaning
Position display
Tool information
Active M functions
Active coordinate transformations
Active subprogram
Active program section repeat
Program called with PGM CALL
Current machining time
Name of the active main program
General program information (PGM tab)
Soft key Meaning
No direct Name of the active main program
selection
possible
Circle center CC (pole)
Dwell time counter
Machining time when the program was
completely simulated in the Test Run operating
mode
Current machining time in percent
Current time
Active programs
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Status displays
2
2.4
83