HEIDENHAIN TNC 620 User Manual page 611

Parameter settings
DisplaySettings
Display step for individual axes
List of all available axes
Display step for position display in mm or degrees
0.1
0.05
0.01
0.005
0.001
0.0005
0.0001
0.00005 (Option 23)
0.00001 (Option 23)
Display step for position display in inches
0.005
0.001
0.0005
0.0001
0.00005 (Option 23)
0.00001 (Option 23)
DisplaySettings
Definition of unit of measure valid for the display
metric: Use metric system
inch: Use inch system
DisplaySettings
Format of NC programs and display of cycles
Program input in HEIDENHAIN conversational format or in DIN/ISO
HEIDENHAIN: Program input in Positioning with MDI in conversational format
ISO: Program input in Positioning with MDI mode of operation in DIN/ISO
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Machine-specific user parameters 18.1
18
611