HEIDENHAIN TNC 620 User Manual page 606

17
MOD Functions
17.14 Load machine configuration
17.14 Load machine configuration
Application
Caution: Data loss!
The TNC overwrites your machine configuration
when you load (restore) a backup. The overwritten
machine data will be lost in the process. You can no
longer undo this process!
Your machine tool builder can provide you a backup with a machine
configuration. After entering the keyword RESTORE, you can load
the backup on your machine or programming station. Proceed as
follows to load the backup:
In the MOD dialog, enter the keyword RESTORE
In the TNC's file manager, select the backup file
(e.g. BKUP-2013-12-12_.zip). The TNC opens a pop-up window
for the backup
Press the emergency stop
Press the OK soft key to start the backup process
606
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015