HEIDENHAIN TNC 620 User Manual page 428

12
Programming: Multi-Axis Machining
12.2 The PLANE function: Tilting the working plane (software option 8)
Resetting PLANE function
Show the soft-key row with special functions
Select the PLANE function: Press the TILT
MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row
Select function to be reset: This resets the PLANE
function internally
Specify whether the TNC automatically moves the
rotary axes to the default setting (MOVE or TURN) or
not (STAY)
Further Information:
TURN/STAY (entry is mandatory), page 441
Terminate the entry: Press the END key
The PLANE RESET function resets the current PLANE
function—or an active cycle 19—completely (angles
= 0 and function is inactive). It does not need to be
defined more than once.
Deactivate tilting in the Manual operation operating
mode in the 3D ROT menu.
Further Information:
page 538
428
Automatic positioning: MOVE/
Activating manual tilting:,
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
NC block
25 PLANE RESET MOVE ABST50 F1000