HEIDENHAIN TNC 620 User Manual page 277

Element information
In the Element Information window, the TNC displays the
coordinates of the machining position that you last selected in the
List View window or Graphics window by clicking on the mouse.
You can also use the mouse to change the graphic display. The
following functions are available:
In order to rotate the model shown in three dimensions: Hold
down the right mouse button down and move the mouse
To shift the model shown: Hold the center mouse button or the
wheel button down and move the mouse.
To zoom in on a certain area: Mark a zoom area by holding
the left mouse button down. After you release the left mouse
button, the TNC zooms in on the defined area
To rapidly magnify and reduce any area: Rotate the mouse
wheel backwards or forwards
To return to the standard display: Press the shift key and
simultaneously double-click with the right mouse key. The
rotation angle is maintained if you only double-click with the
right mouse key
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
DXF converter (option 42)
7
7.3
277