HEIDENHAIN TNC 620 User Manual page 440

12
Programming: Multi-Axis Machining
12.2 The PLANE function: Tilting the working plane (software option 8)
Input parameters
Axis angle A?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle B?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Axis angle C?: Axis angle
is to be tilted. If entered incrementally, it is the
angle
current position. Input range: –99999.9999° to
+99999.9999°
Continue with the positioning properties
Further Information:
behavior of the PLANE function, page 441
Abbreviations used
Abbreviation
AXIAL
440
to which
by which the A axis is to be tilted from its
to which
by which the B axis is to be tilted from its
to which
by which the C axis is to be tilted from its
Specifying the positioning
Meaning
In the axial direction
the A axis
the B axis
the C axis
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
NC block
5 PLANE AXIAL B-45 .....