Set Screen Layout; Control Panel - HEIDENHAIN TNC 620 User Manual

2
Introduction
2.2 Visual display unit and operating panel

Set screen layout

You select the screen layout yourself: In the Programming mode,
for example, you can have the TNC show program blocks in the left
window while the right window displays programming graphics.
You could also display the program structure in the right window
instead, or display only program blocks in one large window. The
available screen windows depend on the selected operating mode.
Set up screen layout:
Press the screen switchover key: The soft key row
shows the available layout options
Further Information:
page 77
Select the desired screen layout with a soft key

Control panel

The TNC 620 is delivered with an integrated operating panel. As
an alternative, the TNC 620 is also available with a separate display
unit and an operating panel with an alphabetic keyboard.
1 Alphabetic keyboard for entering texts and file names, as well
as for ISO programming
File management
2
Calculator
MOD function
HELP function
3 Programming modes
4 Machine operating modes
5 Initiating programming dialogs
Navigation keys and GOTO jump command
6
7 Numerical input and axis selection
8 Touchpad
9 Mouse buttons
10 Machine operating panel
More information
The functions of the individual keys are described on the inside
front cover.
Some machine manufacturers do not use the
standard operating panel from HEIDENHAIN. Refer
to your machine manual.
External keys, e.g. NC START or NC STOP, are
described in your machine manual.
76
Modes of operation,
Machine manual
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
2
5
4 3
6
1
2
5
4 3
7
7
6
8
9
10