Programming Tool Movements In Conversational Dialog - HEIDENHAIN TNC 620 User Manual

3
Programming: Fundamentals, File Management
3.2 Opening programs and entering
Programming tool movements in conversational
dialog
To program a block, initiate the dialog by pressing a function key. In
the screen headline, the TNC then asks you for all the information
necessary to program the desired function.
Example of a positioning block
Open block
COORDINATES ?
10 (Enter the target coordinate for the X axis)
20 (Enter the target coordinate for the Y axis)
Y
Go to the next question with ENT
RADIUS COMP.: RL/RR/NO COMP.?
Enter "No radius compensation" and go to the
next question with ENT
FEED RATE F=? / F MAX = ENT
100 (Enter a feed rate of 100 mm/min for this path contour
movement)
Go to the next question with ENT
MISCELLANEOUS FUNCTION M ?
Enter 3 (miscellaneous function M3 "Spindle ON").
With the END key, the TNC ends this dialog.
The program-block window displays the following line:
3 L X+10 Y+5 R0 F100 M3
110
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015