File Management; Differences From File Management Of Nc Part Programs - HEIDENHAIN iTNC 530 HSCI Technical Manual

9.1.3 File management

Differences from
file management of
NC part programs
1670
File management in the PLC mode is largely the same as in the Programming
and Editing mode of operation (see the iTNC 530 User's Manual). If you press
the PGM MGT key while in the PLC mode, the iTNC displays the PLC partition
as well, at the upper left next to the TNC partition.
Note
Space characters are not permissible in path and file names.
File types displayed by the iTNC when you press the SELECT TYPE soft key:
Soft key Function
Show all files
Show only PLC programs (*.PLC)
Show only ASCII files (*.A)
Show only help files (*.HLP)
Show only system files (*.SYS)
Show only compensation value tables (*.COM)
Show only tables with compensation value assignments
(*.CMA)
Show only PLC error tables (*.PET)
Show only PLC source files (*.SRC)
Show only soft-key project files (*.SPJ)
Return to previous menu
HEIDENHAIN Technical Manual iTNC 530 HSCI