HEIDENHAIN TNC 620 User Manual page 472

13
Programming: Pallet Editor
13.1 Pallet management
Selecting pallet table
Select file manager in Programming mode or the Program Run
operating modes: Press the PGM MGT key
Display all type .P files: Press the SELECT TYPE and SHOW ALL
.P soft keys
Select a pallet table with the arrow keys, or enter a new file
name to create a new table
Confirm your entry with the ENT key
Use the screen layout key to switch between table
view and list view
Exit pallet table
To call the file manager, press the PGM MGT key
To select a different type of file, press the SELECT TYPE soft key
and the soft key for the desired file type, e.g. SHOW .H
Select the desired file
Processing pallet table
A machine parameter defines whether the pallet
table is to be executed blockwise or continuously.
In the Program run, full sequence or Program run, single
block operating mode, select the file manager: Press the PGM
MGT key
Display all type .P files: Press the SELECT TYPE and SHOW .P
soft keys
Select the pallet table with the arrow keys and confirm with ENT
Execute the pallet table: Press the NC START key
472
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015