Straight Line L - HEIDENHAIN TNC 620 User Manual

Straight line L

The TNC moves the tool in a straight line from its current position
to the straight-line end point. The starting point is the end point of
the preceding block.
Press the L key to open a program block for a
linear movement
Coordinates of the end point of the straight line, if
necessary
Radius compensation RL/RR/R0
Feed rate F
Miscellaneous function M
Example NC blocks
7 L X+10 Y+40 RL F200 M3
8 L IX+20 IY-15
9 L X+60 IY-10
Capture actual position
You can also generate a straight-line block (L block) by using the
ACTUAL-POSITION-CAPTURE key:
In the Manual Operation mode, move the tool to the position
you want to capture
Switch the screen display to programming.
Select the program block after which you want to insert the
straight line block
Press the ACTUAL-POSITION-CAPTURE key: The
TNC generates a straight line block with the actual
position coordinates.
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Path contours  Cartesian coordinates
6
6.4
225