15
Positioning with Manual Data Input
15.1 Programming and executing simple machining operations
Example 2: Correcting workpiece misalignment on machines
with rotary tables
Use a 3-D touch probe to carry out a basic rotation
Further Information:
with 3-D touch probe (option 17), page 520
Write down the rotation angle and cancel the basic rotation
Select operating mode: Positioning with
manl.data input
Select the rotary table axis, enter the rotation
angle and feed rate you wrote down, e.g. L C
+2.561 F50
Conclude entry
Press the NC START button: The rotation of the
table corrects the misalignment
544
Compensating workpiece misalignment
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015