Programming Positip 880; Program Capabilities; Editing And Moving Through A Program; I – 6 Programming Positip 880 - HEIDENHAIN POSITIP 880 User Manual

I – 6 Programming POSITIP 880

Program Capabilities

Operating mode: PROGRAMMING
This section describes the programming capabilities of the POSITIP
880. The programs can be edited in program memory and executed in
the EXECUTE PROGRAM mode. The operator can load, save or delete
a program from internal storage in FILE OPERATIONS. The CLEAR
function clears the current program in memory. See Fig. I.41.
Function
Allows access to all programming features.
Allows the operator to load, save, delete or
clear a program.
Allows the operator access to all block
functions.

Editing and moving through a program

Press Up/Down Arrow keys to move the program block highlight
cursor to the next or previous block. The highlight cursor will wrap
around the first and last blocks in the program.
To move to a specific block number in the current program, enter a
number and press ENT.
To insert a new step in the current program, press PROGRAM FEATURES
soft key and select the desired block. The block is inserted above
the block currently highlighted.
To edit the block currently highlighted, press the ENT key.
To delete the block currently highlighted from the program, press
the CE key.
POSITIP 880
Soft key
Fig. I.41 Program function screen
53