File Management Of Tnc Partition (Tnc:\) - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

15.5 File Management of TNC Partition (TNC:\)

TNC partition

The directory structure is displayed on the left.

The associated files are listed on the right.

Press the following key combination to call the TNC partition:

Select the Programming and Editing operating mode

Call Program Management

With the UP and DOWN keys, the corresponding subdirectories or files can be

selected. The selected directory or the selected file are indicated in the header.

With the +/- key you can open and close subdirectories.

Use the LEFT and RIGHT arrow keys to move between the directory and file

side of the screen.

Under RS232 RS422 Setup the user can switch between standard display mode (without

subdirectories, similar to TNC 415) and the enhanced display mode (with subdirectories) via

the selection field PGM MGT: with the ENTER key.

Press the MOD key in the open Program Management to obtain the soft key RS232 RS422