File Management; Differences From File Management Of Nc Part Programs - HEIDENHAIN iTNC 530 Technical Manual

8.1.3 File Management

Differences from
file management of
NC part programs
February 2002
File management in PLC mode is largely the same as in the Programming and
Editing mode of operation (see User's Manual for iTNC 530). If you press the
PGM MGT key while in the PLC mode, the iTNC displays also the PLC
partition at the upper left next to the TNC partition.
File types displayed by the iTNC when you press the SELECT TYPE soft key:
Soft key Function
Show all files
Show only PLC programs (*.PLC)
Show only ASCII files (*.A)
Show only help files (*.HLP)
Show only system files (*.SYS)
Show only compensation value tables (*.COM)
Show only tables with compensation value assignments
(*.CMA)
Show only PLC error tables (*.PET)
Show only PLC source files (*.SRC)
Show only soft-key project files (*.SPJ)
Return to previous menu
PLC Functions 8 – 5