Configuring Connections - Windows Terminal Service - HEIDENHAIN TNC 620 User Manual

Configuring connections – Windows Terminal
Service
Configuring an external computer
You do not need additional software for your external
computer for connecting to the Windows Terminal
Service.
Proceed as follows to configure the external computer, e.g. in the
Windows 7 operating system:
After pressing the Windows start button select the menu item
System control via the task bar
Select the System menu item
Select the Advanced system settings
Select the Remote tab
In the Remote support
remote support connection with this computer
In the Remote desktop
connections from computers on which any version of
remote desktop is installed
Confirm the settings via the
Configuring the TNC
Depending on the operating system of your external
computer and the protocol used in accordance with
this, select either Windows Terminal Service (RDP)
or Windows Terminal Service (RemoteFX).
Configure the TNC as follows:
After pressing the green HEIDENHAIN button, select the menu
item Remote Desktop Manager via the task bar
Press the New connection button in the
Remote Desktop Manager window
Select the menu item Windows Terminal Service (RDP) or
Windows Terminal Service (RemoteFX)
Specify the required connection information in the
Edit connection window
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Remote Desktop Manager (option 133)
menu item
area, activate the function
area, activate the function
OK button
Permit
Permit
2
2.6
91