HEIDENHAIN TNC 620 User Manual page 124

3
Programming: Fundamentals, File Management
3.4 Working with the file manager
Step 2: Select a directory
Move the highlight to the desired directory in the left-hand
window—the right-hand window automatically shows all files
stored in the highlighted directory
Step 3: Select a file
Press the SELECT TYPE soft key
Press the soft key for the desired file type, or
Press the SHOW ALL soft key to display all files; or
Use wildcards, e.g. 4*.h: show all files type .h
starting with a 4
Move the highlight to the desired file in the right window
Press the SELECT soft key; or
Press the ENT key
The TNC opens the selected file in the operating mode from which
you called the file manager.
If you enter the first letter of the file you are looking
for in file management, the cursor automatically
jumps to the first program with the same letter.
124
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015