Pocket Table For Tool Changer - HEIDENHAIN TNC 620 User Manual

5
Programming: Tools
5.2 Tool data

Pocket table for tool changer

The machine tool builder adapts the features of the
pocket table to the requirements of your machine.
Refer to your machine manual.
You need a pocket table for automatic tool changing. You manage
the assignment of your tool changer in the pocket table. The pocket
table is in the TNC:\TABLE directory. The machine manufacturer
can amend the name, path and content of the pocket table. If you
wish, you can select different views using the soft keys in the
TABLE FILTER menu.
Editing a pocket table in a Program Run operating mode
Select the tool table: Press the TOOL TABLE soft
key
Select the pocket table: Press the POCKET TABLE
soft key
Set the EDIT soft key to ON. On your machine this
might not be necessary or even possible. Refer to
your machine manual
184
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015