HEIDENHAIN TNC 620 User Manual page 617

Parameter settings
off: Error message is displayed
Geometry filter for filtering out linear elements
Type of stretch filter
Maximum distance of filtered to unfiltered contour
Maximum length of distance resulting from filtering
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
- Off: No filter active
- ShortCut: Leave out single points on polygon
- Average: The geometry filter smooths corners
0 to 10 [mm]: The filtered out points lie within this tolerance to the resultant
distance
0 to 1000 [mm]: Length over which geometry filtering is effective
Machine-specific user parameters 18.1
18
617