Creating A New Nc Program / File Management - HEIDENHAIN TNC 620 User Manual

First steps | Programming the first part

Creating a new NC program / file management

To create a new NC program:
Press the PGM MGT key
The control opens the file manager.
The file management of the control is arranged much
like the file management on a PC with Windows
Explorer. The file management enables you to
manage data in the control's internal memory.
Select a folder
Enter the desired file name with the extension .H
Press the ENT key
The control asks for the unit of measure of the
new NC program.
Press the soft key of the desired unit of measure:
MM or INCH
The control automatically generates the first and last NC blocks of
the NC program. You will not be able to change these NC blocks at a
later time.
Further information on this topic
File management
Further information: "File management", Page 105
Creating a new NC program
Further information: "Creating and entering NC programs",
Page 90
HEIDENHAIN | TNC 620 | Klartext Programming User's Manual | 01/2022
2
53