The Tnc In A Network - HEIDENHAIN TNC 620 User Manual

3
Programming: Fundamentals, File Management
3.4 Working with the file manager

The TNC in a network

You must connect the Ethernet card to the network.
Further Information:
page 594
The TNC logs error messages during network
operation.
Further Information:
page 594
If the TNC is connected to a network, the left directory window
displays additional drives. All the functions described above
(selecting a drive, copying files, etc.) also apply to network drives,
provided that you have been granted the corresponding rights.
Connecting and disconnecting a network drive
To call the file manager, press the PGM MGT key
To select the network settings: Press the NET soft
key (second soft key row)
Network drive management: Press the DEFINE
NETWORK CONNECTN. soft key. In a window
the TNC shows the network drives available for
access. With the soft keys described below you
can define the connection for each drive.
Soft key Function
Connect
Establish the network connection. If the
connection is active, the TNC marks the Mount
column.
Separate
End network connection
Auto
Automatically establish network connection
whenever the TNC is switched on. The TNC
marks the Auto column if the connection is
established automatically
Add
Set up new network connection
Remove
Delete existing network connection
Copy
Copy network connection
Edit
Edit network connection
Clear
Delete the status window
142
Ethernet interface ,
Ethernet interface ,
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015