HEIDENHAIN TNC 620 User Manual page 483

Handwheel display
1 Only with wireless handwheel HR 550
the handwheel is in the docking station or whether wireless
operation is active
2 Only with wireless handwheel HR 550 FS:
strength, six bars = maximum field strength
3 Only with wireless handwheel HR 550 FS:
status of the rechargeable battery, six bars = fully charged A bar
moves from the left to the right during recharging
ACTL: Type of position display
4
Y+129.9788: Position of the selected axis
5
*: STIB (control in operation); program run has been started or
6
axis is in motion
S0: Current spindle speed
7
F0: Feed rate at which the selected axis is moving
8
E: Error message
9
10 3D: Tilted-working-plane function is active
11 2D: Basic rotation function is active
12 RES 5.0: Active handwheel resolution. Distance in mm/rev
(°/rev for rotary axes) that the selected axis moves for one
handwheel revolution
13 STEP ON or OFF: Incremental jog active or inactive. If a function
is active, the TNC additionally displays the active jog increment.
14 Soft-key row: Selection of various functions, described in the
following sections
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Moving the machine axes 14.2
FS: Shows whether
Shows the field
Shows the charge
1
2
3
4
5
7 7 8
12
14
14
7 6
7 9 10 11
13
483