HEIDENHAIN TNC 620 User Manual page 167

Navigating in the TNCguide
It's easiest to use the mouse to navigate in TNCguide. A table
of contents appears on the left side of the screen. Clicking on
the rightward pointing triangle opens subordinate sections, and
clicking on the respective entry opens the corresponding page. It is
operated in the same manner as the Windows Explorer.
Linked text positions (cross references) are shown underlined and
in blue. Clicking the link opens the associated page.
Of course you can also operate TNCguide through keys and
soft keys. The following table contains an overview of the
corresponding key functions.
Soft key Function
If the table of contents on the left is active:
Select the entry above it or below it
If the text window on the right is active:
Move the page downwards or upwards if
texts or graphics are not displayed fully
If the table of contents on the left is active:
Open up the table of contents
If the text window on the right is active: No
function
If the table of contents on the left is active:
Close the table of contents
If the text window on the right is active: No
function
If the table of contents on the left is active:
Use the cursor key to show the selected
page
If the text window on the right is active: If
the cursor is on a link, jump to the linked
page
If the table of contents on the left is active:
Switch the tab between the display of the
table of contents, display of the subject
index, and the full-text search function
and switching to the right-hand half of the
screen
If the text window on the right is active:
Jump back to the window on the left
If the table of contents on the left is active:
Select the entry above it or below it
If the text window on the right is active:
Jump to next link
Select the page last shown
Page forward if you have used the "Select page
last shown" function
Move up by one page
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
TNCguide context-sensitive help system
4
4.9
167