HEIDENHAIN TNC 620 User Manual page 201

You can edit the tool data only in the form view,
which you can activate by pressing the FORM FOR
TOOL soft key or the ENT key for the currently
highlighted tool.
If you use the tool management without a mouse,
then you can activate and deactivate functions with
the "-/+" key.
In the tool management, use the GOTO soft key to
search for the tool number or pocket number.
In addition, you can perform the following functions by mouse:
Sorting function. You can sort the data in ascending or
descending order (depending on the active setting) by clicking a
column of the table head.
Arrange columns. You can arrange the columns in any sequence
you want by clicking a column of the table head and then
moving it with the mouse key pressed down. The TNC does
not save the current column sequence when you exit the tool
management (depending on the active setting)
Show miscellaneous information in the form view: The TNC
displays tool tips when you leave the mouse pointer on an
active entry field for more than a second and when you have set
the EDIT ON/OFF soft key to ON
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Tool management (option number 93)
5
5.4
201