HEIDENHAIN TNC 620 User Manual page 597

Select the Internet tab.
Setting Meaning
Proxy
Direct connection to Internet /NAT: The
control forwards Internet inquiries to the
default gateway and from there they must
be forwarded through network address
translation (e.g.. if a direct connection to a
modem is available)
Use proxy: Define the Address and Port
of the Internet router in your network, ask
your network administrator for the correct
address and port
Telemaintenance The machine manufacturer configures the
server for telemaintenance here. Changes
must always be made in agreement with
your machine tool builder
Select the Ping/Routing tab to enter the ping and routing
settings:
Setting Meaning
Ping In the Address: field, enter the IP number
for which you want to check the network
connection. Input: four numerical values
separated by periods, e.g. 160.1.180.20.
As an alternative, you can enter the name of
the computer whose connection you want to
check
Press the Start button to begin the test.
The TNC shows the status information in
the Ping field
Press the Stop button to conclude the test
Routing
For network specialists: Status information of
the operating system for the current routing
Press the Update button to refresh the
routing information
Select the NFS UID/GID tab to enter the user and group
identifications:
Setting Meaning
Set UID/GID
User ID: Definition of which user
for NFS shares
identification the end user uses to access
files in the network. Ask your network
specialist for the proper value
Group ID: Definition of the group
identification with which you access
files in the network. Ask your network
specialist for the proper value
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Ethernet interface 17.11
17
597