HEIDENHAIN TNC 620 User Manual page 550

16
Test Run and Program Run
16.1 Graphics
Overview: Display modes
In the Program Run, Single Block and Program Run, Full
Sequence operating modes as well as in the Test Run operating
mode, the TNC displays the following soft keys:
Soft key
The position of the soft keys depends on the
selected operating mode.
The Test Run operating mode additionally offers the following
views:
Soft key
Limitations during program run
The result of the simulation can be faulty if the TNC's
computer is overloaded with complicated processing
tasks.
3-D view
Choose 3-D view:
The high-resolution 3-D view enables you to display the surface of
the machined workpiece in greater detail. With a simulated light
source, the TNC creates realistic light and shadow conditions.
Press the 3-D view soft key
550
View
Plan view
Projection in three planes
3-D view
View
Volume view
Volume view and tool paths
Tool paths
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015