HEIDENHAIN TNC 620 User Manual page 627

Accessories
Electronic Handwheels
Touch probes
Advanced Function Set 1
Expanded functions Group 1
Advanced Function Set 2
Expanded functions Group 2
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
■
One HR 410 portable handwheel, or
■
One HR 550 FS portable wireless handwheel with display or
■
One HR 520 portable handwheel with display, or
■
One HR 420 portable handwheel with display or
■
One HR 130 panel-mounted handwheel; or
■
Up to three HR 150 panel-mounted handwheels via HRA 110
handwheel adapter
■
TS 260: Triggering 3-D touch probe with cable connection
■
TS 440: 3-D touch trigger probe with infrared transmission
■
TS 444: Battery-free 3-D touch trigger probe with infrared transmission
■
TS 640: 3-D touch trigger probe with infrared transmission
■
TS 740: High-precision 3-D touch trigger probe with infrared
transmission
■
TT 160: 3-D touch trigger probe for tool measurement
■
TT 449: 3-D touch trigger probe for tool measurement with infrared
transmission
(option 8)
Machining with rotary tables
Cylindrical contours as if in two axes
Feed rate in distance per minute
Coordinate transformations:
Tilting the working plane
Interpolation:
Circle in 3 axes with tilted working plane (spatial arc)
(option 9)
3-D machining:
Motion control with minimum jerk
3-D tool compensation through surface normal vectors
Using the electronic handwheel to change the angle of the swivel
head during program run without affecting the position of the tool
point. (TCPM = Tool Center Point Management)
Keeping the tool normal to the contour
Tool radius compensation perpendicular to traversing direction and
tool direction
Interpolation:
Linear in 5 axes (subject to export permit)
Technical Information 18.3
18
627