HEIDENHAIN TNC 620 User Manual page 400

11
Programming: Special Functions
11.3 Active Chatter Control ACC (option 145)
Activating/deactivating ACC
To activate ACC, you first need to set the ACC column to Y (ENT
key = Y, NO ENT = N) for the respective tool in the tool table
TOOL.T.
Activate/deactivate ACC for the machine mode:
Select the Program run, full sequence, Program
run, single block or the Positioning with
manl.data input operating mode
Shift the soft-key row
Activate ACC: Set the soft key to ON and the TNC
displays the ACC symbol in the position display
Further Information:
To deactivate ACC: Set the soft key to OFF
If ACC is on, in the position display the TNC shows the symbol
400
Status displays, page 80
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
.