HEIDENHAIN TNC 620 User Manual page 599

Network settings specific to the device
Press the DEFINE NETWORK CONNECTN. soft key to enter
the network settings for a specific device. You can define any
number of network settings, but you can manage only seven at
one time
Setting Meaning
Network drive
List of all connected network drives. The
TNC shows the respective status of the
network connections in the columns:
To manage the network drives, use the
screen buttons.
To add network drives, use the Add
button: The TNC then starts the
connection wizard, which guides you by
dialog through the required definitions.
Status log
Display of status information and error
messages.
Press the Clear button to delete the
contents of the Status Log window.
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Mount: Network drive connected / not
connected
Auto: Network drive is to be
connected automatically/manually
Type: Type of network connection. cifs
and nfs are possible
Drive: Designation of the drive on the
TNC
ID: Internal ID that identifies if a mount
point has been used for more than one
connection
Server: Name of the server
Authorization name: Name of the
directory on the server that the TNC is
to access
User: User name with which the user
logs on to the network
Password: Network drive password
protected / not protected
Request password?: Request / Do not
request password during connection
Options: Display additional connection
options
Ethernet interface 17.11
17
599