Monitoring Network Traffic Using Traceroute - Juniper EX Series User Manual

J-web application package
Hide thumbs Also See for EX Series:
Table of Contents

Advertisement

Table 91: J-Web Ping Host Field Summary (continued)
Field
Function
Interval
Specifies the interval, in seconds, between
transmissions of individual ping requests.
Packet Size
Specifies the size of the ping request packet.
Source Address
Specifies the source address of the ping request
packet.
Time-to-Live
Specifies the time-to-live (TTL) hop count for the
ping request packet.
Bypass Routing
Determines whether ping requests are routed by
means of the routing table.
If the routing table is not used, ping requests are
sent only to hosts on the interface specified in the
Interface box. If the host is not on that interface,
ping responses are not sent.
Related
Documentation

Monitoring Network Traffic Using Traceroute

Purpose
Action
Copyright © 2017, Juniper Networks, Inc.
Monitoring Interface Status and Traffic on page 198
NOTE:
This topic applies only to the J-Web Application package.
Use the Traceroute page in the J-Web interface to trace a route between the switch and
a remote host. You can use a traceroute task to display a list of waypoints between the
switch and a specified destination host. The output is useful for diagnosing a point of
failure in the path from the switch platform to the destination host and addressing network
traffic latency and throughput problems.
To use the traceroute tool:
Select
>
1.
Troubleshoot
Traceroute
Next to
2.
Advanced options
Enter information into the Traceroute page.
3.
The
field is the only required field.
Remote Host
Your Action
Select the interval from the list.
Type the size, in bytes, of the packet. The size can
be from 0 through 65468. The switch adds 8 bytes
of ICMP header to the size.
Type the source IP address.
Select the TTL value from the list.
To bypass the routing table and send the ping
requests to hosts on the specified interface only,
select the check box.
To route the ping requests using the routing table,
clear the check box.
.
, click the expand icon.
Chapter 16: Monitoring Tasks
203

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents