Juniper EX Series User Manual page 148

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 66: DHCP Service Configuration Pages Summary for EX4300 Switches (continued)
Field
WINS Servers
Domain Name
NetBIOS Node Type
Gateway Routers
Option
Option-82
Circuit Identifier
Ranges
Remote Identifier
Ranges
Address Range
128
Function
Defines a list of NetBIOS name servers.
Specifies the domain name that clients must
use to resolve hostnames.
Specifies the NetBOIS node that provides the
initial node file to the client.
Defines a list of relay agents on the subnet, in
the specified order—from top to bottom.
Specifies the DHCP options.
Identifies the circuit (interface or VLAN or both)
on the switch on which the request was
received.
Specifies the circuit identifier range.
By default, the remote ID is the MAC address of
the switch
Specifies the remote identifier range.
Your Action
To add a NetBIOS name server, click
Type an IP address in the
Add IP Address
pop-up window.
Click .
OK
To remove a NetBIOS name server, select
the IP address in the WINS Servers box, and
click .
Remove
Type the name of the domain.
Select the type from the list.
To add a relay agent, click
Add
address in the
Add IP Address
window.
Click .
OK
To remove a relay agent, select the IP
address in the Gateway Routers box, and
click .
Remove
To add a DHCP option, click
DHCP Option pop-up window is displayed.
Enter the following:
Enter the DHCP Code in the Code box.
Select the DHCP type from the
Select the DHCP subtype from the
list.
Enter the DHCP value in the
Click .
OK
To remove a DHCP option, select the option
in the Option box, and click
Type the circuit identifier.
Type the range for the circuit identifier.
Type the remote identifier.
Type the range for the remote identifier.
Copyright © 2017, Juniper Networks, Inc.
.
Add
. Type an IP
pop-up
Add . The Add
Type list.
Sub Type
box.
Value
.
Remove