Monitoring Rip Routing Information; Table 97: Summary Of Key Rip Routing Output Fields - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 96: Summary of Key OSPF Routing Output Fields (continued)
Field
Activity Time
Area
Options
DR Address
BDR Address
Uptime
Adjacency
Related
Documentation

Monitoring RIP Routing Information

Purpose
Action
Meaning

Table 97: Summary of Key RIP Routing Output Fields

Field Values
RIP Statistics
212
Values
The activity time.
Area that the neighbor is in.
Option bits received in the hello packets from
the neighbor.
Address of the designated router.
Address of the backup designated router.
Length of time since the neighbor came up.
Length of time since the adjacency with the
neighbor was established.
Configuring an OSPF Network (J-Web Procedure) on page 139
Layer 3 Protocols Supported on EX Series Switches
NOTE: This topic applies only to the J-Web Application package.
Use the monitoring functionality to monitor RIP routing on routing devices.
To view RIP routing information in the J-Web interface, select
.
Information
To view RIP routing information in the CLI, enter the following CLI commands:
show rip statistics
show rip neighbor
Table 97 on page 212 summarizes key output fields in the RIP routing display in the J-Web
interface.
Additional Information
Monitor
Additional Information
Copyright © 2017, Juniper Networks, Inc.
> >
Routing RIP