Qfx10002 Network Port Leds - Juniper QFX10002 Hardware Manual

Table 12: QFX10002-72Q Port Mapping
Port Number 4X10 Gigabit
Ethernet Port
67
✓
68
✓
69
✓
70
✓
71
✓

QFX10002 Network Port LEDs

Each QFX10002 QSFP+ port uses a single bi-colored LED to indicate link status and activity. See
17 on page 33 for an example of these triangle shaped LEDs.
Figure 17: Port LEDs
The same single bi-colored LED also indicates when the interface is configured and connected using an
optical split cable or a copper DACBO cable to a 10-Gigabit Ethernet port.
There are some slight differences in the amber LED behavior depending on the firmware level of the
complex programmable logic device (CPLD) in your switch and the Junos release level running on the
(Continued)
4X10 Gigabit 40 Gigabit
Channelized Ethernet
Port Group (Default)
✓
✓
✓ ✓
✓
✓
100 Gigabit 100 Gigabit Ethernet Disables
Ethernet
66, 68
✓
– –
– –
– –
69, 70
✓
33
Figure