Table 91: J-Web Ping Host Field Summary - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Meaning

Table 91: J-Web Ping Host Field Summary

Field Function
Remote Host Identifies the host to ping.
Advanced Options
Don't Resolve Determines whether to display hostnames of the
Addresses hops along the path.
Interface Specifies the interface on which the ping requests
are sent.
Count Specifies the number of ping requests to send.
Don't Fragment Specifies the Don't Fragment (DF) bit in the IP
header of the ping request packet.
Record Route Sets the record route option in the IP header of the
ping request packet. The path of the ping request
packet is recorded within the packet and displayed
in the main pane.
Type-of-Service Specifies the type-of-service (TOS) value in the IP
header of the ping request packet.
Routing Instance Name of the routing instance for the ping attempt.
202
Select
1. Troubleshoot>Ping Host
Next to Advanced options, click the expand icon.
2.
Enter information into the Ping Host page, as described in
3.
The Remote Host field is the only required field.
Click Start .
4.
The results of the ping operation are displayed in the main pane . If no options are
specified, each ping response is in the following format:
bytes bytes from ip-address: icmp_seq=number ttl=number time=time
To stop the ping operation before it is complete, click
5.
Table 91 on page 202 lists the fields.
.
.
OK
Your Action
Type the hostname or IP address of the host to ping.
To suppress the display of the hop hostnames,
select the check box.
To display the hop hostnames, clear the check
box.
Select the interface on which ping requests are sent
from the list. If you select
sent on all interfaces.
Select the number of ping requests to send from
the list.
To set the DF bit, select the check box.
To clear the DF bit, clear the check box.
To record and display the path of the packet,
select the check box.
To suppress the recording and display of the path
of the packet, clear the check box.
Select the decimal value of the TOS field from the
list.
Select the routing instance name from the list.
Copyright © 2017, Juniper Networks, Inc.
Table 91 on page 202.
, the ping requests are
any