Juniper EX Series User Manual page 198

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
178
To configure a Virtual Chassis by using the J-Web interface:
Select >
Configure Virtual Chassis
1.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
The properties that you can configure are displayed.
2.
The first section of the Virtual Chassis Configuration page displays the Virtual Chassis
member configuration. The display includes a list of member switches, their member
IDs, and the mastership priority.
The second section displays the operational status of the Virtual Chassis configuration,
member details, and the dedicated and the configured VCPs.
Enter information into the page as described in
3.
Click one of the following options:
4.
—To add a member's configuration to the Virtual Chassis configuration, click
Add
Add .
—To modify an existing member's configuration, click
Edit
Delete —To delete the configuration of a member, click
To configure uplink ports on EX2200, EX2200-C, and EX3300 switches and uplink
5.
module ports on EX4200, EX4300, EX4500, and EX4600 switches as VCPs , select
the member in the Virtual Chassis members list and select
as VCP . Select the port from the list.
On EX4550 switches, to configure a VCP, select the member in the Virtual Chassis
members list and select
To remove the VCP configuration from the uplink ports on EX2200, EX2200-C, and
6.
EX3300 switches and uplink module ports on EX4200, EX4300, EX4500, and EX4600
switches , select the member in the Virtual Chassis members list and select
Delete Uplink Port as VCP
On EX4550 switches, to remove the VCP configuration from the port of a member,
select the member in the Virtual Chassis members list and select
as VCP .
.
Commit Options
Table 83 on page
> . Select the port from the list.
Action Set Port as VCP
.
> . See Using
Commit
179.
.
Edit
Delete .
>
Action Set Uplink Port
Action
>
Action Delete Port
Copyright © 2017, Juniper Networks, Inc.
>