Dashboard For Ex Series Switches - Juniper EX Series User Manual

Related
Documentation

Dashboard for EX Series Switches

Copyright © 2017, Juniper Networks, Inc.
the switch and enabled HTTPS. See
Web Access" on page 55.
When you attempt to log in through the J-Web interface, the switch authenticates your
username with the same methods used for Telnet and SSH.
If the switch does not detect any activity through the J-Web interface for 15 minutes, the
session times out and is terminated. You must log in again to begin a new session.
To explicitly terminate a J-Web session at any time, click
J-Web User Interface for EX Series Switches Overview on page 3
Configuring Management Access for the EX Series Switch (J-Web Procedure) on
page 52
NOTE: This topic applies only to the J-Web Application package.
When you log in to the J-Web user interface, the dashboard for the Juniper Networks EX
Series Ethernet Switches appears. Use the dashboard to view system information.
The Update Available window appears if there is a latest update of the J-Web Application
package available on the Juniper Networks server. This window is enabled by the auto
update feature of J-Web.
NOTE:
The Update Available window will not appear when you log in, if you have
not selected the
Preference section in the
the Check for update automatically on every login is selected.
If you choose Update Later, you can update to the latest J-Web Application
package by clicking the orange icon next to Update Available on the top
pane of the J-Web interface or through
The dashboard comprises a graphical chassis viewer and four panels.
This topic describes:
Graphical Chassis Viewer on page 10
System Information Panel on page 11
Health Status Panel on page 13
Capacity Utilization Panel on page 15
Alarms Panel on page 15
"Generating SSL Certificates to Be Used for Secure
Check for updates automatically on every login
Maintain > Update J-Web
Maintain > Update J-Web
Chapter 1: Overview
in the top pane.
Logout
in the Update
side pane. By default,
.
9