Configuring Lldp (J-Web Procedure) - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Release History Table
Related
Documentation

Configuring LLDP (J-Web Procedure)

76
Release
14.1X53-A2
Configuring 802.1X Interface Settings (CLI Procedure)
Example: Setting Up 802.1X for Single-Supplicant or Multiple-Supplicant Configurations
on an EX Series Switch
Understanding Authentication on Switches
NOTE: This topic applies only to the J-Web Application package.
Use the LLDP Configuration page to configure LLDP global and port settings for an EX
Series switch on the J-Web interface.
To configure LLDP:
Select >
1. Configure Switching
The LLDP Configuration page displays LLDP Global Settings and Port Settings.
The second half of the screen displays operational details for the selected port.
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
For an EX8200 Virtual Chassis configuration, select the member and the slot (FPC)
2.
from the list.
To modify LLDP Global Settings, click
3.
Enter information as described in
To modify Port Settings, click
4.
Enter information as described in
Description
J-Web Application package Release 14.1X53-A2 does not support
802.1X authentication on EX4600 switches.
> .
LLDP
Commit Options
Global Settings
Table 42 on page
in the Port Settings section.
Edit
Table 43 on page
> . See Using
Commit
.
77.
77.
Copyright © 2017, Juniper Networks, Inc.