Table 38: Scheduler Maps Configuration Fields; Select; For Details About All Commit Options; Select One Of The Following Options - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1

Table 38: Scheduler Maps Configuration Fields

Field
Scheduler Map Name
Scheduler Mapping
Related
Documentation
72
NOTE: On EX Series switches, you cannot configure a scheduler map on an
individual interface that is a member of a link aggregation group (LAG).
Instead, you must configure the scheduler map on the LAG itself—that is, on
the aggregated Ethernet (
To configure scheduler maps:

Select

Configure > Class of Service
1.
NOTE: After you make changes to the configuration on this page, you
must commit the changes immediately for them to take effect. To commit
all changes to the active configuration, select
See "Using the Commit Options to Commit Configuration Changes (J-Web
Procedure)" on page 31

Select one of the following options:

2.
—Adds a scheduler map. Enter information into the scheduler map page as
Add
described in Table 38 on page
—Modifies an existing scheduler map. Enter information into the scheduler map
Edit
page as described in
Delete —Deletes an existing scheduler map.
Function
Specifies the name for a scheduler map.
Enables you to associate a preconfigured
scheduler with a forwarding class.
After scheduler maps have been applied to an
interface, they affect the hardware queues and
packet schedulers.
Defining CoS Schedulers (J-Web Procedure) on page 69
Defining CoS Schedulers and Scheduler Maps (CLI Procedure)
Example: Configuring CoS on EX Series Switches
Monitoring CoS Scheduler Maps on page 232
) interface.
ae
> Scheduler Maps

for details about all commit options.

72.
Table 38 on page 72.
Your Action
To name a map, type the name—for example,
be-scheduler-map
To associate a scheduler with a forwarding class,
locate the forwarding class and select the
scheduler in the box next to it.
For example, for the
select the configured scheduler from the list.
.
Commit Options > Commit
.
forwarding class,
best-effort
Copyright © 2017, Juniper Networks, Inc.
.