Configuring System Identity For An Ex Series Switch (J-Web Procedure); Table 29: System Identity Configuration Summary - Juniper EX Series User Manual

Configuring System Identity for an EX Series Switch (J-Web Procedure)

Table 29: System Identity Configuration Summary

Field Function
Host Name Defines the hostname of the switching platform.
Domain Name Defines the network or subnetwork that the
machine belongs to.
Root Password Sets the root password that user root can use
to log in to the switching platform.
Confirm Root Password Verifies that the root password has been typed
correctly.
DNS Name Servers Specifies a DNS server for the switching
platform to use to resolve hostnames into
addresses.
Domain Search Specifies the domains to be searched.
Copyright © 2017, Juniper Networks, Inc.
NOTE: This topic applies only to the J-Web Application package.
To configure identification details for an EX Series switch:
Select >
Configure System Properties
1.
displays configuration details.
To modify the configuration, click
2.
as described in Table 29 on page
NOTE: After you make changes to the configuration on this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes for details about
all commit options.
Chapter 4: System Basics Configuration
> . The System Identity page
System Identity
. Enter information into the System Identity page
Edit
51.
Commit Options
Your Action
Type the hostname.
Type the domain name.
Type a plain-text password. The system encrypts
the password.
NOTE: After a root password has been defined, it
is required when you log in to the J-Web user
interface or the CLI.
Retype the password.
To add an IP address, click
To edit an IP address, click
To delete an IP address, click
To add a domain, click
To edit a domain click
To delete a domain, click
> . See Using
Commit
.
Add
Edit .
.
Delete
.
Add
.
Edit
Delete .
51