Juniper EX Series User Manual page 174

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 76: Performance Probe Tests Configuration Fields (continued)
Field
Target (Address or URL)
Source Address
Routing Instance
History Size
Request Information
Probe Type
Interval
Test Interval
Probe Count
Moving Average Size
154
Function
Specifies the IP address or the URL of the
probe target.
Specifies the IP address to be used as the
probe source address.
Specifies the routing instance over which
the probe is sent.
Specifies the number of probe results to
be saved in the probe history.
Specifies the type of probe to send as
part of the test.
Sets the wait time (in seconds) between
probe transmissions.
Sets the wait time (in seconds) between
tests.
Sets the total number of probes to be
sent for each test.
Specifies the number of samples to be
used in the statistical calculation
operations to be performed across a
number of the most recent samples.
Your Action
Type the IP address in dotted decimal
notation or the URL of the probe target.
If the target is a URL, type a fully formed
URL that includes http:// .
Type the source address to be used for
the probe. If you do not supply this value,
the packet uses the outgoing interface's
address as the probe source address.
Type the routing instance name. The
routing instance applies only to
and probe types.
icmp-ping-timestamp
The default routing instance is
Type a number from 0 through 255. The
default history size is 50.
Select a probe type from the list:
http-get
http-get-metadata
icmp-ping
icmp-ping-timestamp
tcp-ping
udp-ping
udp-ping-timestamp
Type a number from 1 through 255 .
Type a number from 0 through 86400 .
Type a number from 1 through 15.
Type a number from 0 through 255.
Copyright © 2017, Juniper Networks, Inc.
icmp-ping
.
inet.0