Juniper EX Series User Manual page 147

Table 66: DHCP Service Configuration Pages Summary for EX4300 Switches (continued)
Field
DHCP Pool Information
Pool Name
Link Pool
Network Address
IP Address
Subnet mask
DHCP Pool Attributes
Pool Name
Server Identifier
TFTP Server
Maximum Lease Time
(Seconds)
Boot File
Boot Server
Grace Period
DNS Name Servers
Copyright © 2017, Juniper Networks, Inc.
Function
Specifies the name of an address-assignment
pool.
Specifies the pool name to which it is linked.
Specifies the IP address pool range.
Specifies the subnet specified in DHCP Subnet.
Displays the name of an address-assignment
pool.
Specifies the IP address of the DHCP server
reported to a client.
Specifies the Trivial File Transfer Protocol
(TFTP) server that the client uses to obtain the
client configuration file.
Specifies the maximum length of time a client
can hold a lease. (Dynamic BOOTP lease
lengths can exceed this maximum time.)
Specifies the path and filename of the initial
boot file to be used by the client.
Specifies the TFTP server that provides the
initial boot file to the client.
Specifies the grace period for which a client can
hold a lease.
Defines a list of DNS servers the client can use.
Chapter 10: Configuring Services
Your Action
Type the pool name.
Select the option from the list.
Type an IP address that is part of the subnet
specified in the DHCP Subnet field.
Type a subnet mask that is specified in the
DHCP Subnet field.
The pool name is displayed.
Type the IP address of the server. If you do not
specify a server identifier, the primary address
of the interface on which the DHCP exchange
occurs is used.
Enter the IP address of the TFTP server.
Type a number.
Type a path and filename.
Type the IP address or hostname of the TFTP
server.
Type the grace period in seconds.
To add a DNS server, click Add
address in the Add IP Address
window.
Click OK
To remove a DNS server, select the IP
address in the DNS Name Servers box, and
click Remove .
. Type an IP
pop-up
127