Juniper EX Series User Manual page 74

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 30: Secure Management Access Configuration Summary (continued)
Field Function
Enable Junos XML Enables secure SSL access to the Junos
protocol over SSL XML management protocol XML
scripting API.
Junos XML Specifies SSL certificates to be used for
management protocol encryption.
Certificate
This field is available only after you
create at least one SSL certificate.
Enable HTTP Enables HTTP access on interfaces.
Enable HTTPS Enables HTTPS access on interfaces.
Certificates tab
54
Your Action
To enable SSL access, select the
management protocol over SSL
To enable an SSL certificate, select a certificate from the
Junos XML management protocol SSL Certificate list—for
example, .
new
To enable HTTP access, select the
check box.
Select and clear interfaces by clicking the direction arrows:
To enable HTTP access on an interface, add the interface
to the HTTP Interfaces list. You can either select either
all interfaces or specific interfaces.
To enable HTTPS access, select the
check box.
Select and deselect interfaces by clicking the direction
arrows:
To enable HTTPS access on an interface, add the
interface to the HTTPS Interfaces list. You can either
select either all interfaces or specific interfaces.
NOTE: Specify the certificate to be used for HTTPS
access.
Copyright © 2017, Juniper Networks, Inc.
Enable Junos XML
check box.
Enable HTTP access
Enable HTTPS access