Software, Files, Licenses, Logs; Uploading A Configuration File (J-Web Procedure); Managing Configuration Files Through The Configuration History - Juniper EX Series User Manual

CHAPTER 17

Software, Files, Licenses, Logs

Uploading a Configuration File (J-Web Procedure)

Copyright © 2017, Juniper Networks, Inc.
Uploading a Configuration File (J-Web Procedure) on page 241
Managing Configuration Files Through the Configuration History (J-Web
Procedure) on page 242
Setting or Deleting the Rescue Configuration (J-Web Procedure) on page 245
Updating J-Web Interface on EX Series Switches (J-Web Procedure) on page 246
Upgrading Junos OS on EX Series Switches (J-Web Procedure) on page 247
Managing Licenses for the EX Series Switch (J-Web Procedure) on page 249
Rebooting or Halting the EX Series Switch (J-Web Procedure) on page 251
Managing Log, Temporary, and Crash Files on the Switch (J-Web Procedure) on page 252
Registering the EX Series Switch with the J-Web Interface on page 254
Generating Support Information Reports for EX Series Switches Using the J-Web
Interface on page 254
NOTE: This topic applies only to the J-Web Application package.
You can create a configuration file on your local system, copy the file to the EX Series
switch and then load the file into the CLI. After you have loaded the configuration file,
you can commit it to activate the configuration on the switch. You can also edit the
configuration interactively using the CLI and commit it at a later time.
To upload a configuration file from your local system:
Select >
1. Maintain Config Management
The work area displays the File to Upload box.
Specify the name of the file to upload using one of the following methods:
2.
Type the absolute path and filename in the File to Upload box.
Click Browse to navigate to the file.
> .
Upload
241