Monitoring 802.1X Authentication - Juniper EX Series User Manual

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Release History Table
Related
Documentation

Monitoring 802.1X Authentication

Purpose
Action
Meaning
236
Release Description
14.1X53-D10 Starting with Junos OS Releases 14.1X53-D10 and 16.1R1, J-Web
monitoring is supported on EX4600 switches and EX4600 switches in
a Virtual Chassis.
Configuring a Virtual Chassis on an EX Series Switch (J-Web Procedure) on page 177
Verifying the Member ID, Role, and Neighbor Member Connections of a Virtual Chassis
Member
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support 802.1X
authentication on EX4600 switches.
Use the monitoring feature to display details of authenticated users and users that failed
authentication.
To display authentication details in the J-Web interface, select
.
802.1X
To display authentication details in the CLI, enter the following commands:
show dot1x interface detail | display xml
show dot1x interface detail <interface> | display xml
show dot1x auth-failed-users
The details displayed include:
A list of authenticated users.
The number of connected users.
A list of users that failed authentication.
You can also specify an interface for which the details must be displayed.
Monitoring > Security
Copyright © 2017, Juniper Networks, Inc.
>