Configuring Services; Configuring Dhcp Services (J-Web Procedure); Configuring Dhcp Services (J-Web Procedure) On Ex Series Switches; Chapter 10 Configuring Services - Juniper EX Series User Manual

CHAPTER 10

Configuring Services

Configuring DHCP Services (J-Web Procedure)

Configuring DHCP Services (J-Web Procedure) on EX Series Switches

Copyright © 2017, Juniper Networks, Inc.
Configuring DHCP Services (J-Web Procedure) on page 123
Configuring SNMP (J-Web Procedure) on page 131
Configuring DHCP Services (J-Web Procedure) on EX Series Switches on page 123
Configuring DHCP Services on EX4300 Switches (J-Web Procedure) on page 126
NOTE: This topic applies only to the J-Web Application package.
Use the J-Web DHCP Configuration pages to configure DHCP pools for subnets and static
bindings for DHCP clients on an ACX Series Universal Access Gateway router or an EX
Series Ethernet Switch. If DHCP pools or static bindings are already configured, use the
Configure Global DHCP Parameters Configuration page to add settings for these pools
and static bindings. Settings that have been previously configured for DHCP pools or
static bindings are not overridden when you use the Configure Global DHCP Parameters
Configuration page.
To configure the DHCP server:
Select Configure > Services
1.
Access a DHCP Configuration page:
2.
To configure a DHCP pool for a subnet, click
To configure a static binding for a DHCP client, click
box.
To globally configure settings for existing DHCP pools and static bindings, click
Configure Global DHCP Parameters
> DHCP
in the DHCP Pools box.
Add
.
in the DHCP Static Binding
Add
123