Juniper EX Series User Manual page 242

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 102: Summary of IGMP Snooping Output Fields (continued)
Field
VLAN
NOTE: This option is not supported on EX4300 switches.
Group
NOTE: This option is not supported on EX4300 switches.
Next-Hop
NOTE: This option is not supported on EX4300 switches.
Statistics
Packets per Vlan
NOTE: This option is supported only on EX4300 switches.
Global
NOTE: This option is supported only on EX4300 switches.
Multicast Snooping Nexthops
ID
NOTE: This option is supported only on EX4300 switches.
Reference Count
NOTE: This option is supported only on EX4300 switches.
Kernel Reference Count
NOTE: This option is supported only on EX4300 switches.
Downstream Interface
NOTE: This option is supported only on EX4300 switches.
Related
Documentation
222
show igmp-snooping route
show igmp-snooping statistics
show igmp-snooping vlans
Values
The VLAN for which IGMP snooping is enabled.
Indicates the multicast groups learned by the VLAN.
Specifies the next hop assigned by the switch after performing
the route lookup.
Displays the number of packets sent or received, or the number
of received errors.
Displays the statistics name and statistics count. The statistics
names are:
Bad Length
Bad Checksum
Bad Receive If
Rx non-local
Timed out
Next-hop identifier of the prefix. The identifier is returned by
the routing device's Packet Forwarding Engine.
Number of cache entries that are using this next hop.
Kernel reference count for the next hop.
Interface names associated with each multicast next-hop ID.
Copyright © 2017, Juniper Networks, Inc.