Monitoring Cos Classifiers; Table 104: Summary Of Key Cos Classifier Output Fields - Juniper EX Series User Manual

Table 103: Summary of Spanning Tree Protocols Output Fields (continued)
Field
BPDUs Received
Next BPDU Transmission
Related
Documentation

Monitoring CoS Classifiers

Purpose
Action
Meaning

Table 104: Summary of Key CoS Classifier Output Fields

Field
Classifier Name
CoS Value Type
Copyright © 2017, Juniper Networks, Inc.
Values
Total number of BPDUs received.
Number of seconds until the next BPDU is scheduled to be sent.
show spanning-tree interface
show spanning-tree bridge
Configuring Spanning Tree Protocols (J-Web Procedure) on page 100
NOTE: This topic applies only to the J-Web Application package.
J-Web Application package Release 14.1X53-A2 does not support Class of
Service (CoS) on EX4600 switches.
Use the monitoring functionality to display the mapping of incoming CoS values to the
forwarding class and loss priority for each classifier.
To monitor CoS classifiers in the J-Web interface, select
.
Classifiers
To monitor CoS classifiers in the CLI, enter the following CLI command:
show class-of-service classifier
Table 104 on page 225 summarizes key output fields for CoS classifiers.
Values
Name of a classifier.
The classifiers are displayed by type:
—All classifiers of the DSCP type.
dscp
ieee-802.1 —All classifiers of the IEEE 802.1
type.
inet-precedence —All classifiers of the IP
precedence type.
Chapter 16: Monitoring Tasks
>
Monitor Class of Service
Additional Information
To display classifier assignments, click the
plus sign (+).
>
225