Juniper EX Series User Manual page 152

J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
Table 67: SNMP Configuration Page (continued)
Field Function
System Override Free-form text string that overrides the system
Name hostname.
Communities
To add a community, click Add
Community Specifies the name of the SNMP community.
Name
Authorization Specifies the type of authorization (either read-only or
read-write) for the SNMP community being configured.
Traps
To add a trap group, click
Add
Trap Group Specifies the name of the SNMP trap group being
Name configured.
Categories Specifies which trap categories are added to the trap
group being configured.
Targets Specifies one or more hostnames or IP addresses for
the systems to receive SNMP traps generated by the
trap group being configured.
Health Monitoring
132
.
Your Action
Type the hostname of the system.
Type the name of the community being added.
Select the authorization (either read-only or
read-write) from the list.
Type the name of the group being added.
To generate traps for authentication failures,
select .
Authentication
To generate traps for chassis and environment
notifications, select
Chassis
To generate traps for configuration changes,
select .
Configuration
To generate traps for link-related notifications
(up-down transitions), select
To generate traps for remote operation
notifications, select Remote operations
To generate traps for remote network
monitoring (RMON), select
To generate traps for routing protocol
notifications, select Routing
To generate traps on system warm and cold
starts, select Startup .
To generate traps on Virtual Router
Redundancy Protocol (VRRP) events (such as
new-master or authentication failures), select
VRRP events .
1. Enter the hostname or IP address, in dotted
decimal notation, of the target system to
receive the SNMP traps.
2. Click .
Add
Copyright © 2017, Juniper Networks, Inc.
.
.
Link
.
RMON alarm .
.