Table 32: Classifiers Configuration Fields - Juniper EX Series User Manual

Table 32: Classifiers Configuration Fields

Field
Classifier Name
Classifier Type
Copyright © 2017, Juniper Networks, Inc.
You can use the J-Web interface to define CoS classifiers on an EX Series switch.
Classifiers examine the CoS value or alias of an incoming packet and assign the packet
a level of service by setting its forwarding class and loss priority.
To define CoS classifiers:
Select Configure > Class of Service
1.
NOTE: After you make changes to the configuration on this page, you
must commit the changes immediately for them to take effect. To commit
all changes to the active configuration, select
See "Using the Commit Options to Commit Configuration Changes (J-Web
Procedure)" on page 31
Click one of the following options:
2.
—Adds a classifier. Enter information into the classifier page as described in
Add
Table 32 on page 61.
—Modifies an existing classifier. Enter information into the classifier page as
Edit
described in Table 32 on page
Delete —Deletes an existing classifier.
Function
Specifies the name for a classifier.
Specifies the type of classifier:
or .
inet-precedence
Chapter 5: Class of Service Configuration
> Classifiers .
for details about all commit options.
61.
Your Action
To name a classifier, type the name—for
example,
ba-classifier
, , Select a value from the list.
dscp ieee-802.1
Commit Options > Commit
.
61
.